Innovative Approaches and Applications to Asset Management
PEMAC (Plant Engineering and Maintenance Association of Canada) GTA Chapter invites you to join them for its next Professional Development event. Don’t miss the opportunity to develop your knowledge and network with local professionals.
March 21, 2019
4:00 pm to 8:30 pm
The Centre for Maintenance Optimization and Reliability Engineering (C-MORE)
Myhal Centre of Engineering, Innovation & Entrepreneurship
55 St. George Street, Toronto ON, M5S 0C9
Janet Lam (Phd.), University of Toronto, Assistant Director, Centre for Maintenance Optimization and Reliability Engineering, University of Toronto
Real world applications of reliability and maintenance engineering
Kuilin Chen, University of Toronto
Developing a digital twin of a reheat furnace in steel manufacturing
Chi-Guhn Lee (Phd), Director, Centre for Maintenance Optimization and Reliability Engineering, University of Toronto
Machine learning approaches for maintenance, repair, and operations
4:00 p.m. Registration
4:15 p.m. Tour of U of T specialized labs*
- Energy Lab (Jim Wallace)
- Micro Robotics Lab (Eric Diller)
- Robotics and mechatronics Lab (Goldie Nejat)
5:30 p.m. Technical Sessions**
- PEMAC Introduction and GTA Chapter update
- C-MORE introduction and case studies.
- Real World applications of reliability and maintenance engineering
- Developing a digital twin of a reheat furnace in steel manufacturing
- Machine learning approaches for maintenance, repair, and operations
7:30 p.m. Dinner and Networking***
Member $10 (Must be logged in)
Non Member $15
Students: FREE (Email email@example.com with Student ID # for your complementary code. Please site which event you would like to attend)
Kuilin Chen is currently a Ph.D. student supervised by Prof. Chi-Guhn Lee at University of Toronto. His research interests are development of digital twins for manufacturing processes using deep learning and advanced optimization methods.
Dr. Chi-Guhn Lee
Dr. Chi-Guhn Lee is a Professor of Industrial Engineering and the Director of the Centre for Maintenance Optimization and Reliability Engineering (C-MORE) at the University of Toronto. Dr. Lee received a Ph.D. in Industrial and Operations Engineering at the University of Michigan, Ann Arbor, USA in 2001 and has been active in the areas such as dynamic optimization, Markov decision processes, maintenance optimization, supply chain management and reinforcement learning. He has worked closely with private firms including IBM, General Motors, Magna International, State Grid Corp of China to name a few. He has played various roles in the academic community as well.
Dr. Janet Lam
Dr. Janet Lam has a PhD in Industrial Engineering from the University of Toronto and currently serves as the Assistant Director at the Centre for Maintenance Optimization and Reliability Engineering (C-MORE). Her research interests are using maintenance and failure data to develop statistical models that optimize replacement and inspection scheduling decisions.
*Guests participating in the tour
Please arrive to the main lobby of the Mechanical building (5 King's College Road http://map.utoronto.ca/utsg/building/022) between 4:15-4:30pm. There is a lecture turnover at 4pm, so it will be very busy in the lobby at exactly 4pm. It will quiet down significantly at 4:15. The tour will end in our technical session room
**Guests arriving directly to the technical sessions
Please arrive directly to room 420 of Myhal Centre (55 St. George Street http://map.utoronto.ca/utsg/building/087). The room will be occupied for classes until 5pm, so early arrivals may have to wait in various lobbies of the building. There are many open spaces available for this purpose.
The technical sessions will end sometime between 6:30 and 7pm.
Dinner will take place on the 8th floor of the Myhal Centre. As the elevators can get busy on the hour, please arrive a few minutes before or after.
55 Saint George Street
Toronto, ON M5S 0C9
|Regular (including tax)||$ 15.00 + $ 1.95 Tax|